Heat master - oil fired air delivery warm air - 125,000 to 400,000 BTUH

For technical information in selecting the proper heating system and other technology, click here

Air Heaters AGRI Serie

Air heaters AGRI serie, are specifically designed to meet the critical requirements in greenhouses so far as quality of construction and reliability of operation are concerned.

They are fully manufactured, assembled and above all tested at our works, prior to despatch, providing an extended working life. The all heat exchanger is formed from stainless steel 18% chrome.

Air heaters AGRI serie, work either with light oil (diesel) or gas (propane LPG, methane) and are available in two basic types: suspended (AGRI P) and mobile (AGRI C), in various different capacities.

Constant Quality

Ensured by the choice of the best materials and components, by internal tests issued according to the preestablished ISO 9002 procedures of the quality manual and by periodical production verifications performed by the Certifying Body.

Maintenance? Practically non Existent

Design quality and high technical levels reduce cleaning and check operations to a minimum.

High Efficiency Fans

The systems can be easily expanded in the case of subsequent heated environment extensions.

Heating that does not fear the cold

Direct heat exchange avoids the need for intermediate fluids such as water and vapour, solving the problem of freezing thus making the Agri series ideal for irregular and intermittent use.

Minimum Dimensions Maximum Versatility

Series AGRI space heaters conquer space with their small size and maximum versatility of models: vertical and horizontal versions, floor or suspended mounting, working either with light oil or gas burner, direct or duct distribution air throw system.

The System grows together with the environment

Axial or centrifugal fan, with a large air capacity and a large air throw, suitable for direct or tubing distribution, driven by an electromotor, protected by an accident-prevention cover.

Exclusive shape

The exclusive shape of the heat exchanger with its ample surface ensures very high efficiency and low thermal inertia, therefore allowing to limit heater running time solely to the period of use of the heated spaces, leading to considerable savings on energy costs.

Moreover

• Control System, fitted with a control-board and a bi-thermostat, disigned to inhibits fan start-up until the exchanger has reached a suitable temperature, to provides fan over-run to cool the heat exchanger on shut down and to prohibit burner operation, should the airflow become overheated.
• heater Cabinet, robustly constructed from electrozinc pre-coated steel panels, fitted with a radiant sheet insulation system.

Modine Steam / Hot Water Unit Heater Choices

Typical natural gas and propane air delivery unit heaters. Information on Modine oil fired units available upon request.

Horizontal Delivery Type-Side Inlet/Outlet Connections	Horzontal Delivery Type-Top and Bottom Inlet/Outlet Connections
Vertical Delivery Type - Copper or Copper/Nickel Tubes	"Power-Throw" Type - Copper or Copper / Nickel Type

Typical U.S. Manufactured Natural Gas
and Propane Air Delivery Unit Heaters.

• Click here for more information of Low Profile Gas Fired Unit Heaters
• Click here for more information of Gas Fired Propeller Unit Heaters
• Click here for more information of Oil Heating Systems

GP Air Heater

Introduction

GP Hanging Air Heater is designed for a wide range of indoor environments, including poultry houses, greenhouses, commercial and industrial premises where the ground surface is scarce. Four hooks (two on each side) make it easy to hang the heater close to the area which requires heating.

The heater works on the principle of indirect combustion with heat exchanger, which ensures clean operation and prevents any emission of exhaust gas into the house. The GP heater can burn wide range of fuels such as diesel, natural gas, LPG or propane (paraffin upon request). It is supplied fully assembled and ready for installation. The standard product line encompasses a wide range of sizes with nominal heating efficiencies around 90%.

Technology Basis

The GP Air Heater works on a principle of indirect combustion with heat exchanger, where the flue gases and the air stream are completely separated. The exhaust gases are ventilated outside the building through the chimney.

The heart of the heater is combustion chamber and the heat exchanger. A powerful fan forces room and/or ambient air at high pressure into the heat exchanger where the air absorbs heat from the flue gases. The warm and dry air is then supplied into the room through the air outlet. The standard type of air outlet has an elliptical design suitable for installation of plastic duct for an optimal distribution of the warm air throughout the desired indoor area.

GP Equipment

• High efficiency
• Protected against corrosion (housing is made from pre-coated galvanized steel, combustion chamber and heat exchanger are made from stainless steel)
• Ready to install
• Prevention of faulty operation (dual switching safety thermostat controls the fan moter and the burner)
• Easy to inspect the burning process
• Easy to operate
• Different air diffusers are avaliable on request
• Suitable for diesel, natural gas, LPG or propane (paraffin upon request)

In Floor Heating Systems

We have a great deal of technical in formation avail on in floor heating.We provide technical assistance to clients purchasing other systems. The popularity of floor heating is growing for those growing on ground, placated, low growing systems. We work closely with a specialty company to assist you in design, installation, heat production, Engineering which are efficient and economical. Pictures don't tell the story as all you will see is a concrete pad, or sand, soil, or gravel. But we can assist you as part of your project.

Contact us if you are planning In-Floor Heating System. Not available for areas under 1,500 square feet.

ACME / Modine Fan-Jet Air Delivery Heating, Air Moving
And Ventilation System

• For those will propane, natural gas, steam / hot water and in some cases the fan-jet in combination with air delivery heaters is an in expensive, efficient, quick, dominant way to heat many kinds of structures.
• Greenhouses, packing areas, warehouses, dairy barns, hog / poultry operations, Many different applications, We recently completed a potatoes storage facility to reduce mildew, and in crease air movement.

Technical Specifications

Index Page | Heating Systems | Heating Systems & Technology
Hieating Systems for All Types | Natural Gas/Propane
Oil Heat | Boilers | Mobile Gas/Propane | Mobile Oil | Waste Oil
Cikki Animal/Poultry | In/under Bench